skip to Main Content

The Multicut 160 & 200 are the toughest rotary swipes of their kind – designed and manufactured in Great Britain without any compromise on quality to provide a heavy duty and robust vegetation maintenance machine.

Featuring the unique high lift HD3 blade arrangement with three 13 millimetre thick blades – these specialist models are suitable for cutting and mulching scrub and vegetation of up to 80 millimetre in diameter. With full length skids, floating linkage and rear gauge wheel the Multicut 160 & 200 give a consistent cut on even the most undulating ground.


Video

Watch the Multicut 200 video


AGRICULTURE
AIRFIELD
LIGHT SCRUB
HEAVY SCRUB
PASTURE
STUBBLE MANAGEMENT

FEATURES

Multicut 200

  1. Superior Strength – All Spearhead decks are fully seem welded, not stitched for increased strength and service life.
  2. Heavy Duty Construction – High grade 6 millimetre deck plates with supporting channels for additional toughness.
  3. Easy Height Adjustment – Simple tailwheel beam and pin design for fast height setting. Additional fine height setting feature included standard.
  4. Full Length Skid Protection – dual wear skids run along the whole length of each side of the machine to protect the deck.
  5. Slip Clutch Protection – the driveline is protected by a slip clutch for added security.


BLADE SYSTEM



SPECIFICATIONS

Multicut 160 dimensions

Multicut 200 dimensions

Machine weight*: 520kg/1147lbs
Hitch: Category 2 with floating clevis top link
Cutting width: 1.60m/63in
Overall width: 1.79m/70.5″
Overall length: 2.73m/107.5″
Deck height**: 0.24m/9.5″
Cutting height: 50mm-250mm (2″-8″)
Cutting capacity: 100mm/4″ DIA
Recommended tractor HP: 40hp/30kW
Power take-off speed: 540rpm
Gearbox: 1:1.92 speed-up beveled gears, cast iron housing
1 3/8″ – 6 spline input shaft and ANSI 8/16 Z15 output shaft
Gearbox lubricant: EP80-90W oil
Gearbox oil capacity: 2.1 litres/3.7 pints
Deck construction: All welded construction
Deck material thickness: 5mm (3/16″)
Side skirt material thickness: 6mm (1/4″)
Skid construction: Replaceable bolt on skid shoes
Anti-scalp dish: Round pan 6mm x 545mm (0.24″ x 21.5″) with blade holder bar
Blades (3): 100mm x 12mm (4″ x 0.48″), 30 carbon boron hardened and tempered. Free swinging high lift – low friction
Blade bolts: M24 C/W shank grade 8.8
Blade tip speed: 87 mps/17126 fpm
Driveline: ASAE category 4 with 2 plate slip clutch
Driveline protection: 2 plate slip clutch
Trailwheel mount assembly: Welded box section arm and caster fork with 360 degree swivel
Tailwheel: 5.00-8 rubber tyre with steel hub
Front guard: Single chain guard
Rear guard: Single chain guard

*With front and rear single chain guards
**Underside of deck to skid

Machine weight*: 610kg/1344lbs
Hitch: Category 2 with floating clevis top link
Cutting width: 2.00m/78″
Overall width: 2.08m/82″
Overall length: 3.02m/119″
Deck height**: 0.24m/9.5″
Cutting height: 50mm-250mm (2″-8″)
Cutting capacity: 100mm/4″ DIA
Recommended tractor HP: 45hp/34kW
Power take-off speed: 540rpm
Gearbox: 1:1.5 speed-up beveled gears, cast iron housing
1 3/8″ – 6 spline input shaft and ANSI 8/16 Z15 output shaft
Gearbox lubricant: EP80-90W oil
Gearbox oil capacity: 2.1 litres/3.7 pints
Deck construction: All welded construction
Deck material thickness: 5mm (3/16″)
Side skirt material thickness: 6mm (1/4″)
Skid construction: Replaceable bolt on skid shoes
Anti-scalp dish: Round pan 6mm x 597mm (0.24″ x 23.5″) with blade holder bar
Blades (3): 100mm x 12mm (4″ x 0.48″), 30 carbon boron hardened and tempered. Free swinging high lift – low friction
Blade bolts: M24 C/W shank grade 8.8
Blade tip speed: 85 mps/16732 fpm
Driveline: ASAE category 4 with 2 plate slip clutch
Driveline protection: 2 plate slip clutch
Trailwheel mount assembly: Welded box section arm and caster fork with 360 degree swivel
Tailwheel: 5.00-8 rubber tyre with steel hub
Front guard: Single chain guard
Rear guard: Single chain guard

*With front and rear single chain guards
*Underside of deck to skid


Back To Top
×Close search
Search