skip to Main Content

The extra output Multicut 620 folding wing mower sets the standards in cutting performance with a total of 15 heavy duty cutting blades as standard ensuring the finest chop in fine grasses through to light scrub. The evenness of spread from the five rotors is unrivalled leaving a clean finish and high output unmatched by competitive three rotor machines of the same width

With a six gearbox driveline, each with slip clutch protection, the power is evenly spread to deliver exceptional reliability and durability. The high output 6.2 metre cutting width enables over 6 hectares per hour to be cleared and the compact 2.8 metre transport width ensures that transport between sites is safe and efficient.

Video

Watch the video


AGRICULTURE
PASTURE
LIGHT SCRUB
HEAVY SCRUB
STUBBLE MANAGEMENT
AIRFIELD
HIGHWAYS

Features

  • 6.20 metre cutting width
  • 90hp minimum tractor power requirement
  • Heavy duty 250hp input gearbox
  • Heavy duty 111hp rotor gearboxes
  • Slip clutch protection
  • 8 pneumatic rear wheels
  • Anti-scalp rotor protection dishes
  • 15 x heavy duty cutting blades (3 per rotor)
  • Floating wings
  • Rear lighting kit


DRIVELINE ASSEMBLY MULTICUT 460/620/820

DRIVELINE ASSEMBLY MULTICUT 460/620/820

Specifications

MULTICUT 620 SPECIFICATION
MULTICUT 620 SPECIFICATION

Machine weight*: 2850kg / 6283lbs
Hitch: Multi-positional drawbar
Cutting width: 6.28m / 247″
Working machine width: 6.47m / 255″
Transport machine width: 2.70m / 106″
Maximum working length: 5.07m / 200″
Transport length: 4.93m / 194″
Deck height**: 0.23m / 9″
Transport height: 2.90m / 115″
Cutting height: 25mm – 210mm (1″ – 8 1/4″)
Cutting capacity: 100mm/4″
Wing working angles: 45° up/15° down
Recommended tractor HP: 90hp / 67kW
Power take-off speed: 1000rpm
Gearbox [splitter]: Cast Iron housing
Gearbox [rotor gearbox (x5)]: Cast Iron housing
Gearbox lubricant: EP80-90W or GL-4 / GL-5 oil
Gearbox oil capacity [splitter gearbox]: 2.7 litres / 4.7 pints
Gearbox oil capacity [centre + inner rotor gearboxes (x3)]: 2.1 litres / 3.7 pints
Gearbox oil capacity [outer rotor gearboxes (x2)]: 1.3 litres / 2.3 pints
Deck construction: All welded construction
Deck material thickness: 6mm (1/4″)
Side skirt material thickness: 5mm (3/16″)
Skid construction: Replaceable bolt on skid shoes
Anti-scalp dish [centre rotor + inner wing rotors]: 6mm (1/4″) round pan with blade holder bar
Anti-scalp dish [Outer Wing Rotors (x2)]: 5mm (3/16″) round pan with blade holder bar
Blades (15): 12mm (1/2″) 30 Carbon Boron hardened and tempered. Free swinging high lift – low friction
Blade bolts: M24 C/W shank grade 8.8
Blade tip speed: 79mps / 15551fpm
Driveline: ASAE Category 6
Driveline protection: 2/4-way slip clutches on rotor gearboxes. Overrun on input shaft
Tailwheel mount assemblies: Tubular welded walking axles
Tailwheels (x8): 21×9 14 PLY wide pneumatic tyre with steel hub
Front guard: Single chain guards on each deck
Rear guard: Single chain guards on each deck

*With front and rear single chain guards
**Underside of deck to skid

Multicut 620

Machine weight*: 2850kg / 6283lbs
Hitch: Multi-positional drawbar
Cutting width: 6.28m / 247″
Working machine width: 6.47m / 255″
Transport machine width: 2.70m / 106″
Maximum working length: 5.07m / 200″
Transport length: 4.93m / 194″
Deck height**: 0.23m / 9″
Transport height: 2.90m / 115″
Cutting height: 25mm – 210mm (1″ – 8 1/4″)
Cutting capacity: 100mm/4″
Wing working angles: 45° up/15° down
Recommended tractor HP: 90hp / 67kW
Power take-off speed: 1000rpm
Gearbox [splitter]: Cast Iron housing
Gearbox [rotor gearbox (x5)]: Cast Iron housing
Gearbox lubricant: EP80-90W or GL-4 / GL-5 oil
Gearbox oil capacity [splitter gearbox]: 2.7 litres / 4.7 pints
Gearbox oil capacity [centre + inner rotor gearboxes (x3)]: 2.1 litres / 3.7 pints
Gearbox oil capacity [outer rotor gearboxes (x2)]: 1.3 litres / 2.3 pints
Deck construction: All welded construction
Deck material thickness: 6mm (1/4″)
Side skirt material thickness: 5mm (3/16″)
Skid construction: Replaceable bolt on skid shoes
Anti-scalp dish [centre rotor + inner wing rotors]: 6mm (1/4″) round pan with blade holder bar
Anti-scalp dish [Outer Wing Rotors (x2)]: 5mm (3/16″) round pan with blade holder bar
Blades (15): 12mm (1/2″) 30 Carbon Boron hardened and tempered. Free swinging high lift – low friction
Blade bolts: M24 C/W shank grade 8.8
Blade tip speed: 79mps / 15551fpm
Driveline: ASAE Category 6
Driveline protection: 2/4-way slip clutches on rotor gearboxes. Overrun on input shaft
Tailwheel mount assemblies: Tubular welded walking axles
Tailwheels (x8): 21×9 14 PLY wide pneumatic tyre with steel hub
Front guard: Single chain guards on each deck
Rear guard: Single chain guards on each deck

*With front and rear single chain guards
**Underside of deck to skid

Back To Top
×Close search
Search