skip to Main Content

The Spearhead Outfront Flail delivers consistently high output in wet or dry conditions, long grass or short, fine turf or rank weeds. The Outfront flail cuts cleanly with special “scoop” type flails revolving at 2000rpm. This high rotor speed and enhanced flail shape combine to create a significant updraft to raise laid material and ensure every stem is cut and mulched.

The wide edged flails are arranged on a double spiral for smooth, efficient running and have considerable overlap to ensure nothing is missed and a close and even cut results. Running costs are much lower than rotary or cylinder mowers as there is no sharpening required. The flails are free to swing back should they meet an obstruction allowing the most demanding of mowing situations to be tackled.

Operation is simplicity itself with the mower attached using only two pins and a PTO shaft. Cutting height is adjusted without the use of spanners by the easy to adjust front castor wheels and a rear roller provides an attractive striped finish.

AMENITY
AIRFIELD
HIGHWAYS

Features

  • 1.3 and 1.6 metre cutting widths
  • 8 to 130mm cutting heights
  • Dynamically balanced spiral rotor
  • 24 and 32 Scoop type flails for a clean and uniform cut
  • 115mm diameter full width rear roller
  • Heavy duty 60hp power gearbox
  • Full width rear discharge for even spread
  • Pneumatic front wheels
  • Rear rubber flap kit

Specifications

Cutting width: 1.30m (4ft 3in)
Overall width: 1.50m (4ft 11in)
Transport width: 1.50m (4ft 11in)
Machine weight*: 245kg
Gearbox rating: 60hp
Cutting range: 8mm – 130mm (1/3in – 5in)
Number of flails: 24
PTO speed: 2000rpm (2250 max)
Tractor power required**: 20hp

*Dependent on machine specification
**Dependent on conditions

Cutting width: 1.60m (5ft 3in)
Overall width: 1.80m (5ft 11in)
Transport width: 1.80m (5ft 11in)
Machine weight*: 295kg
Gearbox rating: 60hp
Cutting range: 8mm – 130mm  (1/3in – 5in)
Number of flails: 32
PTO speed: 2000rpm (2250 max)
Tractor power required**: 30hp

*Dependent on machine specification
**Dependent on conditions

Back To Top
×Close search
Search