skip to Main Content

Overview

Designed for agricultural and municipal use and capable of cutting material up to 50 millimetres in thickness the R Series is perfect for the maintenance of farmland and pasture to a high and consistent standard. The machine features heavy duty whale tail flails for a strong cut, hi suction and fine finish. The rotor is also of the standard Spearhead double-spiral construction to increase efficiency and output whilst consuming much less power than conventional designs. Featuring a choice of working widths from 1.9 to 2.7 metres, the R series is the ideal tool for a multitude of different tasks. Belt drive to the rotor provides superior torque with protection offered on the input PTO in the form of an over-run clutch. Featuring a heavy duty headstock, the machine is also delivered with hydraulic sideshift for extra versatility in operation allowing work to be carried out around trees and other obstructions.

Features

  • 1.9, 2.25, 2.45, and 2.7 metre cutting widths
  • 50hp minimum tractor requirement
  • Three point linkage mounting
  • Compact design

  • Hydraulic offset
  • Over-run PTO protection
  • Whale tail flails

  • Rear roller height adjustment
  • Replaceable full length skid kit
  • 50 millimetre maximum cutting diameter

Specifications

Cutting width: 1.90m (6ft 3in)
Overall width: 2.12m (7ft 0in)
Transport width: 2.12m (7ft 0in)
Machine weight*: 430kg
Cutting range: 30 – 80mm (1 1/4in – 3 1/4in)
No. of flails: 24
PTO speed: 540rpm
Tractor power required**: 50hp

*Dependent on machine specification
**Dependent on conditions

Cutting width: 2.27m (7ft 5in)
Overall width: 2.47m (8ft 1in)
Transport width: 2.47m (8ft 1in)
Machine weight*: 487kg
Cutting range: 30 – 80mm (1 1/4in – 3 1/4in)
No. of flails: 28
PTO speed: 1000rpm
Tractor power required**: 60hp

*Dependent on machine specification
**Dependent on conditions

Cutting width: 2.45m (8ft 0in)
Overall width: 2.62m (8ft 7in)
Transport width: 2.62m (8ft 7in)
Machine weight*: 517kg
Cutting range: 30 – 80mm (1 1/4in – 3 1/4in)
No. of flails: 30
PTO speed: 1000rpm
Tractor power required**: 80hp

*Dependent on machine specification
**Dependent on conditions

Cutting width: 2.70m (8ft 10in)
Overall width: 2.92m (9ft 7in)
Transport width: 2.92m (9ft 7in)
Machine weight*: 543kg
Cutting range: 30 – 80mm (1 1/4in – 3 1/4in)
No. of flails: 34
PTO speed: 1000rpm
Tractor power required**: 85hp

*Dependent on machine specification
**Dependent on conditions


Back To Top