skip to Main Content

The innovative RHD Offset Series is a rear mounted Z link mower designed for cost effective verge and embankment mowing. Featuring a choice of working widths from 1.6 to 2.25 metres, the RHD Offset series is the ideal tool for a variety of vegetation control tasks.

Offering 155 degrees of lateral movement and a floating linkage system that allows it to follow the ground, the offset mowing combination can also be tucked in behind the tractor for effective and versatile mulching.

The machine features heavy duty whale tail flails for a strong cut, hi suction and fine finish. The rotor is also of the standard Spearhead double-spiral construction to increase efficiency and output whilst consuming much less power than conventional designs.

Belt drive to the rotor provides superior torque with protection offered on the input PTO in the form of an over-run clutch. Featuring a heavy duty headstock, the machine is also delivered with hydraulic sideshift for extra versatility in operation allowing work to be carried out around trees and other obstructions.

Breakaway protection is built in to the machine as standard to prevent damage in the event of an impact.

AGRICULTURE
PASTURE
AMENITY
LIGHT SCRUB
HIGHWAYS
WATERWAYS

Features

  • 1.60, 1.90 and 2.25 metre cutting widths
  • 55hp minimum tractor requirement
  • 155 degree head angling (+90o and -65o)
  • Double-spiral rotor
  • Z-linkage hydraulic offset
  • Over-run PTO protection
  • Whale Tail flails
  • Rear roller height adjustment
  • Replaceable full length skid kit
  • 50 millimetre maximum cutting diameter

Specifications

Cutting width: 1.60m (5ft 3in)
Overall width: 1.97m (6ft 6in)
Machine weight*: 665kg
Cutting range: 30 – 80mm (1 1/4in – 3 1/4in)
No. of flails: 20
PTO speed: 540rpm
Tractor power required**: 50hp

*Dependent on machine specification
**Dependent on conditions

Cutting width: 1.90m (6ft 3in)
Overall width: 2.27m (7ft 5in)
Machine weight*: 735kg
Cutting range: 30 – 80mm (1 1/4in – 3 1/4in)
No. of flails: 24
PTO speed: 540rpm
Tractor power required**: 70hp

*Dependent on machine specification
**Dependent on conditions

Cutting width: 2.25m (7ft 5in)
Overall width: 2.62m (8ft 7in)
Machine weight*: 775kg
Cutting range: 30 – 80mm (1 1/4in – 3 1/4in)
No. of flails: 28
PTO speed: 540rpm
Tractor power required**: 80hp

*Dependent on machine specification
**Dependent on conditions

Back To Top
×Close search
Search