skip to Main Content

Overview

Ideal for shredding high grass, bushes and maintaining larger areas of vegetation, the RHD Range of heavy duty flail mowers offers the opportunity to mount at either the front or rear of the tractor and is a tougher version of the standard R Series.

Designed for agricultural and municipal use and capable of cutting material up to 50 millimetres in thickness the RHD Series is targeted at intense farmers and professional operators such as contractors and local authorities.

The machine features heavy duty whale tail flails for a strong cut, hi suction and fine finish. The rotor is also of the standard Spearhead double-spiral construction to increase efficiency and output whilst consuming much less power than conventional designs.

Featuring a choice of working widths from 2.3 to 2.8 metres, the RHD series is the ideal tool for a multitude of different tasks providing a versatile investment.

Belt drive to the rotor provides superior torque with protection offered on the input PTO in the form of an over-run clutch. Featuring a heavy duty headstock, the machine is also delivered with hydraulic sideshift for extra versatility in operation allowing work to be carried out around trees and other obstructions.

Features

  • 2.3, 2.5 and 2.8 metre cutting widths
  • 50hp minimum tractor requirement
  • Three point linkage mounting
  • Compact design

  • Hydraulic offset
  • Over-run PTO protection
  • Whale tail flails

  • Rear roller height adjustment
  • Replaceable full length skid kit
  • 50 millimetre maximum cutting diameter

Specifications

Cutting width: 2.30m (7ft 7in)
Overall width: 2.51m (8ft 3in)
Transport width: 2.51m (8ft 3in)
Machine weight*: 750kg
Cutting range: 30 – 80mm
No. of flails: 28
PTO speed: 1000rpm
Tractor power required**: 50hp

*Dependent on machine specification
**Dependent on conditions

Cutting width: 2.50m (8ft 2in)
Overall width: 2.67m (8ft 10in)
Transport width: 2.67m (8ft 10in)
Machine weight*: 785kg
Cutting range: 30 – 80mm
No. of flails: 30
PTO speed: 1000rpm
Tractor power required**: 60hp

*Dependent on machine specification
**Dependent on conditions

Cutting width: 2.80m (9ft 2in)
Overall width: 3.00m (9ft 10in)
Transport width: 3.00m (8ft 10in)
Machine weight*: 850kg
Cutting range: 30 – 80mm
No. of flails: 34
PTO speed: 1000rpm
Tractor power required**: 80hp

*Dependent on machine specification
**Dependent on conditions


Back To Top