skip to Main Content

The Trident Series triple flail mower is a high output finishing flail that is equally at home in wet or dry conditions. Unlike other types of mower, the Trident dictates the timetable and not the mowing conditions.

Available in working widths of 4.0, 5.0  and 6.0metres, the Trident is tractor matched to power units of 80hp and above. Versatility is provided in the form of a removable rear body that can be detached for use as a 1.8 metre wide 3 point linkage mounted finishing flail, equivalent to the standard single-deck Rolliflail.

With the Trident rotor shaft spinning the specially shaped twisted flail at 2,200rpm in the opposite direction to the tractor wheels, grass is lifted by a powerful air blast to provide a clean cut across the full working width of the machine.

Full width adjustable rear rollers are standard, preventing scalping, pushing down stones and providing an attractive, striped finish. With a positive ground pressure of over 400kg per roller the Trident triple series makes an excellent job of preparing sports fields for any forthcoming event.

PASTURE
AMENITY
AIRFIELD

Features

Trident 500

  • 4.0, 5.0 and 6.0 metre cutting widths
  • 80hp minimum tractor requirement
  • 15 to 100mm cutting heights
  • 20 millimetre maximum cutting diameter
  • Detachable 1.8 metre rear cutting deck
  • Twisted flails
  • Turf tyres
  • Full width rear roller
  • Replaceable full length skid kit
  • Rear lighting kit

Specifications

Cutting width: 4.00m (13ft 2in)
Overall width: 5.00m (16ft 5in)
Transport width: 2.50m (8ft 2in)
Overall length: 3.80m (12ft 6in)
Machine weight*: 1800kg
Cutting range: 15 – 100mm (1/2in – 4in)
Cutting unit overlap: 250mm
Wing work angle: 45° up / 15° down
Number of flails: 156
PTO speed: 540rpm
Tractor power required**: 80hp

*Dependent on machine specification
**Dependent on conditions

Cutting width: 5.00m (16ft 5in)
Overall width: 5.70m (18ft 6in)
Transport width: 2.50m (8ft 2in)
Overall length: 3.80m (12ft 6in)
Machine weight*: 1980kg
Cutting range: 15 – 100mm (1/2in – 4in)
Cutting unit overlap: 250mm
Wing work angle: 45° up / 15° down
Number of flails: 180
PTO speed: 540rpm
Tractor power required**: 90hp

*Dependent on machine specification
**Dependent on conditions

Cutting width: 6.00m (19ft 8in)
Overall width: 6.70m (22ft 0in)
Transport width: 2.50m (8ft 2in)
Machine weight*: 2200kg
Cutting range: 15 – 100mm (1/2in – 4in)
Cutting unit overlap: 250mm
Wing work angle: 45° up / 15° down
Number of flails: 210
PTO speed: 540rpm
Tractor power required**: 120hp

*Dependent on machine specification
**Dependent on conditions

Back To Top
×Close search
Search