skip to Main Content


The Rollicut 500 model is a high output roller mower comprising of three decks to deliver increased cutting capacity. Available in a working width of 5.0 metre, the Rollicut 500 is tractor matched to power units of 60hp and above.

Impressive deck articulation is included to deliver superior cutting performance on undulating terrain such as that experienced on golf courses and parkland. Scalping in particularly tricky situations is prevented by the heavy duty full width rollers and flat bottomed blade carriers. Mounted with Spearhead’s signature three blade rotor design and high-lift suction style blades the heavily baffled rotors provide a high speed chopping action that pulverizes grass and other annual growth into a fine mulch, distributing the chopped cuttings evenly behind the machine.

There are no windrows or rotting grass lumps left in the field, in fact regular turf maintenance utilizing this exemplary fine turf cutter will vastly improve grass growth rate, encouraging the grass to tiller out. The machine is belt driven to provide maximum output in all applications, additionally a superb cut height can be achieved by adjusting the four simple adjuster bolts at each corner of the mower.

Running costs are much lower than cylinder mowers as there is no sharpening required. The blades are free to swing back should they meet an obstruction allowing the most demanding of mowing situations to be tackled.

Video

Watch the video


AMENITY

Features

  • 5.0 metre cutting width
  • 60hp minimum tractor requirement
  • 10 to 110mm cutting heights
  • 20mm maximum cutting diameter
  • 78m/sec tip speed
  • High-lift cutting blades
  • Three blade rotor
  • Monocoque deck design
  • 168mm diameter full width front & rear rollers
  • Rear rubber flap kit

Specifications

Cutting width: 5.00m (16ft 5in)
Overall width: 5.10m (16ft 9in)
Transport width: 2.70m (8ft 10in)
Machine weight*: 2400kg
Gearbox rating: 90hp
Cutting range: 10mm – 120mm (1/2in – 4 3/4in)
Cutting unit overlap: 150mm
Number of rotors: 9
Number of blades: 27
PTO protection: Input PTO clutch
PTO speed: 540rpm
Tractor power required**: 60hp

*Dependent on machine specification
**Dependent on conditions

Back To Top
×Close search
Search