skip to Main Content

Overview

The Twiga Flex series is the most prestigious and feature packed reach mower in the Spearhead range. With a multitude of high specification components the machine provides the most luxurious, high output reach mower combination on the market. Featuring an arm-set that can be shifted through 140 degrees, the Twiga Flex series takes its name from the flexibility provided within its design. Initially this appears as some 50 degrees more forward travel than traditional machines, but this is not all, as the machine can also cut in every positional degree to allow the operator ultimate visibility in their most favoured setting. Coupled with the visionary ‘rotorflex’ head rotation system the 70 centimetre offset slew pivot allows the arm to be bought alongside the tractor as far forward as, and in line with the front linkage if desired by the simple adjustment of the machines slewing column. In addition the TWIGA Flex can also be specified with one of the longest reach arms on the market providing up to 8.9 metres of reach.

A potent 80HP totally independent load sensing hydraulic system provides huge cutting power to satisfy the most demanding of operators, whilst the standard Spearhead parallel arm geometry adds to genuine functionality. Also retained on the TWIGA Flex are Spearhead’s signature fabricated arm-sets renowned for high strength adding to the distinctive green colour in helping the machine to stand out from the crowd. Available with standard sideways reach options of 6.7, 7.4, 8.0 and 8.9 metres, the Twiga Flex series offers total versatility. Propilot controls are fitted as standard delivering the best in reliability and comfort throughout the working day. Safety protection is offered in the form of a hydraulic break out ram which when activated lifts the cutting head clear of obstructions and automatically returns it once the obstruction has been cleared. Pressure sensors are also fitted within the reach ram to adjust break out pressure settings as reach is increased.

Video

Watch the video


Features

  • 6.7, 7.4, 8.0 and 8.9 metre reach options
  • 120hp minimum tractor requirement
  • Three point linkage or axle bracket mounting
  • Parallel arm geometry

  • Fully independent 80hp load sensing hydraulic system
  • 220 litre oil capacity
  • Hydraulic safety breakout

  • Dual Rotorflex
  • Ability to cut throughout the full arc of travel
  • Choice of cutting heads and attachments


Control options

Propilot controls
Pro pilot hydraulic proportional controls

Pro Pilot sets a new standard for hydraulic/electric proportional reach mower control systems. A more compact package with additional remote mounting for specific operator placement allows the machine to be more suited to mounting in modern tractor cabs. Benefitting from additional functions on the joystick including proportional head angling, power slew, Telescope/VFR, Autopilot Cancel and Head Float all allowing the operator to manage the machine without moving their hand away from the joystick.


Attachment options

Flailhead

The TWIGA FLEX Range features the high specification MP2 Flailhead as standard. The MP2 Flailhead offers the robustness and cutting capacity to fulfil all of your large scale operational requirements. Featuring a 140mm T flail and 6 inch roller, maximum durability and increased cutting capacity is confirmed and not just expected.

Quadsaw

With a working width of 2.1 metres the quality LRS 2001 Quadsaw is ideal for managing heavy growth and tree limbs of up to 150mm (6”) diameter. Widely used throughout Europe the LRS2001 perfectly compliments the TWIGA FLEX Range of machines, giving exceptional cutting capacity on even the most stubborn growth with its four 500mm diameter cutting blades. Also available for TWIGA FLEX Range mounting is the larger LRS 2401 Quadsaw which gives a wider cutting width and increased capacity in even tougher conditions. Capable of dealing with growth up to 250mm (9’’) the LRS 2401 provides extra vigour with four 600mm diameter cutting blades.

Cutterbar

The TWIGA FLEX Range can be specified with the HL150, HL180 or HL210 cutterbar. Offered in a length to suit your individual requirements and capable of cutting material up to 40mm in diameter, the HL cutterbar range is ideal when trimming back annual growth. Also available on the TWIGA FLEX Range is the HX150 and HX225 cutterbar which offers increased cutting capacity at up to 100mm diameter. This range is ideal for making a clean cut on heavier growth.


Specifications

Maximum reach: 6.70m (22ft 0in)
Machine weight*: TBC
Transport width: 2.20m (7ft 3in)
Oil tank capacity: 220ltr
Gear totally independent hydraulics: Piston
3 point linkage mounting: Standard
Axle mounting: Optional
Right hand or left hand build option: Optional
LED lighting kit: Standard
Tractor power required**: 100hp – 130hp
Tractor weight required**: 4500kg

*Dependent on machine specification (including oil, excluding flailhead or attachment)
**Dependent on conditions

Maximum reach: 7.40m (24ft 3in)
Machine weight*: TBC
Transport width: 2.20m (7ft 3in)
Oil tank capacity: 220ltr
Gear totally independent hydraulics: Piston
3 point linkage mounting: Standard
Axle mounting: Optional
Right hand or left hand build option: Optional
LED lighting kit: Standard
Tractor power required**: 120hp – 150hp
Tractor weight required**: 4750kg

*Dependent on machine specification (including oil, excluding flailhead or attachment)
**Dependent on conditions

Maximum reach: 8.00m (26ft 3in)
Machine weight*: 2550kg
Transport width: 2.20m (7ft 3in)
Oil tank capacity: 220ltr
Gear totally independent hydraulics: Piston
3 point linkage mounting: Standard
Axle mounting: Optional
Right hand or left hand build option: Optional
LED lighting kit: Standard
Tractor power required**: 120hp – 150hp
Tractor weight required**: 5000kg

*Dependent on machine specification (including oil, excluding flailhead or attachment)
**Dependent on conditions

Maximum reach: 8.90m (29ft 2in)
Machine weight*: 2660kg
Transport width: 2.20m (7ft 3in)
Oil tank capacity: 220ltr
Gear totally independent hydraulics: Piston
3 point linkage mounting: Standard
Axle mounting: Optional
Right hand or left hand build option: Optional
LED lighting kit: Standard
Tractor power required**: 140hp – 170hp
Tractor weight required**: 6000kg

*Dependent on machine specification (including oil, excluding flailhead or attachment)
**Dependent on conditions

Back To Top
×Close search
Search