skip to Main Content

Stubble Master 1210 Stubble Master 1210 Rotary Mower

The Stubble Master 1210 is a true ‘beast’ extending to 12.1 metre cutting width to deliver the world’s highest output rotary mulching machine suitable for the most demanding arable, aviation and military markets.

Targeted at modern farming practices, controlled traffic farming and large areas where output is of paramount importance the Stubble Master 1210 allows the effective covering of over 120 hectares per day.

The 1210 goes wider with an increase in rotors with seven heavy duty carriers again fitted with a combination of robust ‘angled’ 12mm thick spring steel blades and flat upper blades to ensure mulch quality.

Transport dimensions are maintained within the legal requirements with the machine folding down via an innovative folding mechanism that ensures that the outer wing folds over completely within itself to sit nicely on a robust stowing cradle.

Watch the video



Spearhead Stubble Master 1210 Rotary Mower
Spearhead Stubble Master 1210 Rotary Mower



STUBBLE MASTER 1210 Working Diensions


STUBBLE MASTER 1210 Transport Diensions

Machine weight*: 7750kg / 17086lbs
Hitch: Multi-positional drawbar
Cutting width: 12.10m / 39′ 8″
Working machine width: 12.31m / 40′ 5″
Transport machine width: 3.00m / 9′ 10″
Maximum working length: 6.78m / 22′ 3″
Deck height**: 0.26m / 10″
Transport height: 3.74m / 12′ 4″
Transport length: 6.73m / 22′ 1″
Cutting height: 25mm – 400mm (1′ 16″)
Cutting capacity: 100mm / 4″
Recommended tractor HP: 240hp / 179kW
Wing work angle: 15° up / 5° down
Power take-off speed: 1000rpm
Gearbox [splitter]: Cast iron housing
Gearbox [rotor gearboxes (x5)]: Cast iron housing
Input shaft: 1-3/4″ Z20 SFT tractor end
Gearbox lubricant: EP80-90W or GL-4 / GL-5 oil
Gearbox oil capacity [splitter gearbox]: 2.7 litres / 4.7 pints
Gearbox oil capacity [centre & inner rotor gearboxes (x3)]: 3.5 litres / 6.2 pints
Gearbox oil capacity [middle & outer rotor gearboxes (x4)]: 2.1 litres / 3.7 pints
Deck construction: All welded construction
Deck material thickness: 3mm (1/8″)
Side skirt material thickness: 6mm (1/4″)
Skid construction: Replaceable bolt on skid shoes
Anti-scalp dish: 5mm (3/16″) round pan with blade holder bar
Blades standard (x21) : 12mm (1/2″) 30 Carbon Boron hardened
and tempered. Free swinging high lift – low friction. Handed.
Blades Starcut (x21) : 12mm (1/2″) 312mm (1/2″) 30 Carbon Boron hardened
and tempered. Free swinging high lift – low friction. Non-handed.
Blade bolts: M24 C/W shank grade 8.8
Blade tip speed: 88mps / 17322fpm
Driveline: ASAE Category 10
Driveline protection: 2/4-way slip clutches on rotor gearboxes.
Overrun on input shaft
Tailwheel mount assemblies: Tubular welded walking axles
Tailwheels (x12): 7.00-12 pneumatic tyre with steel hub
Front guard: Single chain guards on each deck
Rear guard: Single chain guards on each deck

*With front and rear single chain guards
**Underside of deck to skid

Back To Top
×Close search