Dealer Inside
Serial Reg Check
+44 (0)1789 491860

Multicut 390

Locate your dealer

Literature download

Contact Spearhead

With many of the features found on Spearhead’s larger rotary mowers, the Multicut 390 is developed for farmers or small-scale contractors. A small flex wing machine; but not small in capability.

Fitted with a 540rpm driveline as standard, the 390 is perfect for using with compact tractors with a universal drawbar allowing for low and high-hitch mounting. Flat-top deck construction supported by six carrying wheels fitted with heavy-duty industrial tyres reduces ground pressure in work, the machine folds up to a transport width of less than 2.7m when the work is done.

Working at speed with 165hp rated gearboxes powering Spearhead’s trademark three-blade cutting system the Multicut 390 can be adjusted to 15 different cutting height positions delivering performance in operation and a professional finish.

  • 3.9m trailed machine with suitability to smaller tractors.
  • Compact machine with many of the features of larger Multicut models.
  • Selection of machine options available.

AGRICULTURE
PASTURE
LIGHT SCRUB
HEAVY SCRUB
STUBBLE MANAGEMENT
AIRFIELD
HIGHWAYS

Features

Multicut 390 Rotary Mower features

Standard Specification

Multicut 390

Machine weight*: 2000kg (4409lbs)
Minimum weight guide: TBC
Hitch: Multi-positional drawbar
Cutting width: 3.76m (12′ 4″)
Working machine width: 3.98m (13′ 0′)
Transport machine width: 2.62m (8′ 8′)
Maximum working length: 4.73m (15′ 7′)
Transport length: 4.79m (15′ 9″)
Deck height**: 0.28m (1’)
Transport height: 2.10m (6′ 11″)
Cutting height: 43mm – 316mm (1 11/16″ – 12 7/16″)
Cutting capacity: 100mm (4″)
Recommended tractor HP: 40hp (30kW)
Wing working angles: 45° up/6° down
Power take-off speed: 540rpm
Gearbox rating: 250hp (168kW) & 165hp (123kW)
Gearbox(es): 4 x Cast Iron housing
Input shaft: 1 3/8″ Z6 G7 tractor end
Gearbox lubricant [rotor]: 85W-140 oil
Gearbox lubricant [splitter]: 85W-140 oil
Gearbox oil capacity [splitter gearbox]: 4.0 litres (7 pints)
Gearbox oil capacity [centre gearboxes]: 4.3 litres (7.6 pints)
Gearbox oil capacity [rotor gearboxes]: 2 x 4.3 litres (7.6 pints)
Deck construction: All welded construction
Deck material thickness: 3mm (1 5/16″)
Side skirt material thickness: 6mm (1/4″)
Skid construction: Replaceable bolt on skid shoes
Anti-scalp dish: 5mm (3/16″) round pan with blade holder bar
Blades standard: 9 x 12mm (1/2″) 30 Carbon Boron hardened and tempered. Free swinging high lift – low friction
Blade bolts: M24 C/W shank grade 8.8
Blade tip speed: 67mps (13189 fpm)
Driveline: ASAE Category 4
Driveline protection: 2-way slip clutches on rotor gearboxes. Overrun on input shaft
Tailwheel mount assemblies: Tubular welded axle
Tailwheels: 8 x 600-9 10 PLY pneumatic tyre with steel rim
Front guard: Single chain guards on each deck
Rear guard: Single chain guards on each deck
Options: 6, 21 or 8 spline input driveshaft / Standard, Swivel and K80 towing eyes / Starcut blade system / Hydragas suspension / Light kit
* Weight may vary dependent on machine specification
** Underside of deck to skid


Locate your dealer

Literature download

Contact Spearhead

Back To Top
No results found...