Skip to content

The Spearhead Rollicut Proline is a professional machine designed for high output amenity operators covering parkland, golf course, orchard and topping applications.

The Rollicut Proline features multi-axis deck articulation to ensure a level cut and reduced scalping in its either 5.0 or 6.0 metre cutting widths options. Each cutting rotor is powered by a centre mounted gearbox found on each deck, connected via a belt drive transmission with automatic tensioners to ensure reliable power to each of its lifting blades.

Electric wing clutches and position sensors allow independent and automatic stop and restart of each rotor when a deck is raised to clear obstacles. Electric wing locks safely secure and release the machine wings for transport without the operator needing to leave the comfort of the cab.

Reduced stoppages, maintenance and increased user comfort are the key benefits brought with this higher specification model with Spearhead’s Minipilot control system the focal point of managing these additional features.

AMENITY

Features

Rollicut Proline Series Amenity Mower

Specification

Machine weight*: 2860kg (6305lbs)
Hitch: 40mm fixed
Hitch position: Rear mount only
Cutting width: 4.85m (15′ 11″)
Working width:4.97m (16′ 4″)
Overall length: 4.76m (15′ 18″)
Transport width: 2.66m (8′ 9″)
Transport height: 2.57m (8′ 6″)
Cowl height**: 490mm (1′ 8″)
Cutting height: 0 mm – 110 mm (0″ – 4 5/16″)
Cutting capacity: 20 mm (13/16″)
Recommended tractor HP: 60hp (45kW)
Power take-off speed: 540rpm
Input shaft: 1 3/8″ Z6 and 35mm output shaft
Driveline engagement: Fixed centre body with electric disengage wing bodies
Gearboxes (x3): Cast iron housing
Gearbox lubricant: EP80-90W or GL-4 / GL-5 oil
Gearbox oil capacity (x1): 1.3 litres (2.3 pints)
Belt quantity: 6 (2 per deck)
Cowl construction: All welded construction
Skid construction: Replaceable bolt-on skid
Blade type: Fine cut, high lift
Blade quantity: 27
Blade tip speed: 87m/s (17126fpm)
Roller diameter (x2) (front+rear): 168mm (6 1/2″)
Roller adjustment: Manual
* Weight may vary dependent on machine specification
**Top of deck to floor

Machine weight*: 3160kg (6967lbs)
Hitch: 40mm fixed
Hitch position: Rear mount only
Cutting width: 5.99m (19′ 8″)
Working width:6.12m (20′ 1″)
Overall length: 4.76m (15′ 18″)
Transport width: 2.66m (8′ 9″)
Transport height: 2.57m (8′ 6″)
Cowl height**: 490mm (1′ 8″)
Cutting height: 0 mm – 110 mm (0″ – 4 5/16″)
Cutting capacity: 20 mm (13/16″)
Recommended tractor HP: 70hp (53kW)
Power take-off speed: 540rpm
Input shaft: 1 3/8″ Z6 and 35mm output shaft
Driveline engagement: Fixed centre body with electric disengage wing bodies
Gearboxes (x3): Cast iron housing
Gearbox lubricant: EP80-90W or GL-4 / GL-5 oil
Gearbox oil capacity (x1): 1.3 litres (2.3 pints)
Belt quantity: 6 (2 per deck)
Cowl construction: All welded construction
Skid construction: Replaceable bolt-on skid
Blade type: Fine cut, high lift
Blade quantity: 33
Blade tip speed: 87m/s (17126fpm)
Roller diameter (x2) (front+rear): 168mm (6 1/2″)
Roller adjustment: Manual
* Weight may vary dependent on machine specification
**Top of deck to floor


Back To Top
Search