Skip to content
Stubble Master 530 HD Rotary Mower

Commonly known as the “beefed up 500”, that’s not far off. A harder wearing design, it has a Hardox steel deck and a 225HP driveline (compared to 165HP). Everything about this compact machine is incredibly robust.

Radial tyres take challenging terrain in their stride, ensuring a smoother ride. Meanwhile a larger axle and drawbar make the 530 a tough little Stubble Master.

Grass seed farms welcome our high-end machines. When you’re intensively cutting three times a year, every efficiency counts.

  • A heavy-duty, compact machine.
  • 225HP gearbox for additional power.
  • Hard wearing specification.

AGRICULTURE
PASTURE
LIGHT SCRUB
HEAVY SCRUB
STUBBLE MANAGEMENT

Features

Stubble Master 530 HD Rotary Mower Features
Stubble Master 530 HD Rotary Mower Features 2

Specifications

Machine weight*: 4340kg (9568bs)
Hitch: Multi-positional drawbar
Cutting width: 5.06m (16′ 7″)
Working machine width: 5.30m (17′ 5″)
Transport machine width: 2.60m (8′ 7″)
Maximum working length: 5.95m (19′ 7)
Transport length: 5.90m (19′ 5″)
Transport height: 2.40m (7′ 11″)
Deck height**: 0.33m (1′ 1″)
Cutting height: 25mm – 400mm (1″ – 16″)
Cutting capacity: 100mm (4″)
Recommended tractor HP: 120hp (89kW)
Wing working angles: 30° up / 7.5° down
Power take-off speed: 1000rpm
Gearbox(es): 4 x Cast Iron housing
Input shaft: 1″ 3/8 Z21 or Z6 SFT 8 tractor end or 1″ 3/4 Z20 or Z6 SFT 8 tractor end
Gearbox lubricant [splitter]: EP80-90W or GL-4 / GL-5 oil
Gearbox lubricant [rotor]: 85W-140 oil
Gearbox oil capacity [splitter gearbox]: 1 x 2.7 litres (4.7 pints)
Gearbox oil capacity [rotor gearboxes]: 3 x TBC
Deck construction: All welded construction
Deck material thickness: 5mm (3/16″)
Side skirt material thickness: 5mm (3/16″)
Skid construction: Replaceable bolt-on skid shoes
Anti-scalp dish: 5mm (3/16″) round pan with blade holder bar
Blades standard: 9 x 12mm (1/2”) 30 Carbon Boron hardened and tempered. Free swinging high lift – low friction. Handed.
Blades Starcut: 9 x 12mm (1/2”) 30 Carbon Boron hardened and tempered. Free swinging high lift – low friction. Non-handed.
Blade bolts: M24 C/W shank grade 8.8
Blade tip speed: 80mps (15748fpm)
Driveline: ASAE Category 6
Driveline protection: 2-way slip clutches on rotor gearbox. Overrun on input shaft
Tailwheel mount assemblies: Tubular welded walking axles
Tailwheels: 8 x 265/70 R16.5 stubble resistant tyre with steel rim on rear
Front guard: Single chain guards on each deck
Rear guard: Single chain guards on each deck
* Weight may vary dependent on machine specification
** Underside of deck to skid


Back To Top
Search