skip to Main Content

The Sniper Offset flail mower is designed for verge and embankment use giving a high quality and consistent cut in material up to 40mm. It is the perfect choice for maintenance of places such as waterways and highways.

The Sniper Offset range is available in a choice of working widths between 1.6 and 2.3 metres with additional operating flexibility through variable parallel offsetting arms up to a maximum of 1.5m to cater to the working environment. In addition, the machine features variable cowl angling to aid the following of ground contours.

This robust machine features heavy duty hammer flails fitted on an electronically balanced rotor mounted on enclosed, self-aligning bearings. Belt drive gives reliable power transmission and a 140mm full width adjustable, self-cleaning rear roller with scraper and rubber flap will ensure a quality cut and well distributed finish.

AGRICULTURE
PASTURE
AMENITY
LIGHT SCRUB
HIGHWAYS
WATERWAYS

Features

Sniper Flail Offset Mower
Sniper Flail Offset Mower

Specifications

Machine weight: 680kg (1499lbs)
Hitch: Cat 2 with floating clevis top link
Hitch position: Rear mount only
Cutting width: 1.60m (5′ 3″)
Working width:2.18m (7′ 2″)
Overall length: 1.68m (5′ 6″)
Cowl height: 480mm (1′ 7″)
Transport width: 1.55m (5′ 2″)
Transport height: 2.19m (7′ 3″)
Cutting height: 10mm – 30mm (0.4″ – 1.2″)
Cutting capacity: 40mm (1.6″)
Maximum offset distance: 1.46m (4′ 9″)
Wing working angles: 90° up/55° down
Recommended tractor HP: 80hp (60kW)
Power take-off speed: 540/1000rpm
Gearbox: Cast iron housing
Input shaft: 1-3/8″ Z6
Gearbox lubricant: EP80-90W or GL-4 / GL-5 oil
Gearbox oil capacity: 1.2 litres (2.1 pints)
Cowl construction: All welded construction
Skid construction: Replaceable bolt-on skid
Flail: Heavy duty hammer flail
Flail quantity: 20
Flail tip speed: 48m/s (9448 fpm)
Rotor diameter: 159mm (6.3″)
Roller diameter: 140mm (5.5″)
Number of belts: 3

Machine weight: 710kg (1565lbs)
Hitch: Cat 2 with floating clevis top link
Hitch position: Rear mount only
Cutting width: 1.90m (6′ 3″)
Working width:2.48m (8′ 2″)
Overall length: 1.68m (5′ 6″)
Cowl height: 480mm (1′ 7″)
Transport width: 1.55m (5′ 2″)
Transport height: 2.49m (8′ 3″)
Cutting height: 10mm – 30mm (0.4″ – 1.2″)
Cutting capacity: 40mm (1.6″)
Maximum offset distance: 1.46m (4′ 9″)
Wing working angles: 90° up/55° down
Recommended tractor HP: 90hp (67kW)
Power take-off speed: 540/1000rpm
Gearbox: Cast iron housing
Input shaft: 1-3/8″ Z6
Gearbox lubricant: EP80-90W or GL-4 / GL-5 oil
Gearbox oil capacity: 1.2 litres (2.1 pints)
Cowl construction: All welded construction
Skid construction: Replaceable bolt-on skid
Flail: Heavy duty hammer flail
Flail quantity: 24
Flail tip speed: 48m/s (9448 fpm)
Rotor diameter: 159mm (6.3″)
Roller diameter: 140mm (5.5″)
Number of belts: 4

Machine weight: 790kg (1742lbs)
Hitch: Cat 2 with floating clevis top link
Hitch position: Rear mount only
Cutting width: 2.25m (7′ 5″)
Working width:2.73m (9′)
Overall length: 1.68m (5′ 6″)
Cowl height: 480mm (1′ 7″)
Transport width: 1.55m (5′ 2″)
Transport height: 2.79m (9′ 2″)
Cutting height: 10mm – 30mm (0.4″ – 1.2″)
Cutting capacity: 40mm (1.6″)
Maximum offset distance: 1.51m (4′ 11″)
Wing working angles: 90° up/55° down
Recommended tractor HP: 100hp (75kW)
Power take-off speed: 540/1000rpm
Gearbox: Cast iron housing
Input shaft: 1-3/8″ Z6
Gearbox lubricant: EP80-90W or GL-4 / GL-5 oil
Gearbox oil capacity: 1.2 litres (2.1 pints)
Cowl construction: All welded construction
Skid construction: Replaceable bolt-on skid
Flail: Heavy duty hammer flail
Flail quantity: 28
Flail tip speed: 48m/s (9448 fpm)
Rotor diameter: 159mm (6.3″)
Roller diameter: 140mm (5.5″)
Number of belts: 5


Back To Top
×Close search
Search